HVAC Maintenance Plans | Air Conditioning Maintenance
Preventative maintenance for your air conditioner is important. Inspecting the system to check for problems before they grow into major air conditioner malfunctions can save hundreds of dollars and periodic preventative HVAC Maintenance for your air conditioner is a great way to accomplish that. Semi-annual preventative maintenance, or annual preventative maintenance, for your air conditioner by Quigley Heating & Air can go a long way in ensuring the effective operation of your air conditioner.
Quigley Heating & Air’s Q Club Preventative Maintenance Program will keep your air conditioner running at its peak performance and efficiency.
Inadequate preventative air conditioning maintenance is one of the chief causes of air conditioner malfunctions, poor performance and inefficiency. Like an automobile needs inexpensive periodic preventative maintenance to keep it running and to avoid costly repairs, your air conditioner requires periodic preventative maintenance. Neglecting preventative maintenance for your air conditioner may lead to a steady decline in the air conditioner’s performance as well as increased energy consumption and costs. It is also important to point out that maintenance is required to keep your equipment’s warranties in good standing. Give us a call today, we’ve been serving the residence & businesses in Dallas TX for over 75 years.
Q Club Plan Pricing for HVAC Maintenance
Platinum
-
List Item #2
Base Agreement
- 2 Free Visits
- $28 – $24 Monthly Autopay
- $330 – $280 Annual Autopay
- $35 Diagnostic Fee
- 15% Repair/Accessories Discount
- 2 Year Repair Parts Warranty
- 2 Year Repair Labor Warranty
- 1st Scheduling Priority
- Scheduling Within 12 Hours
- $50 Per System Loyalty Credits Towards Equipment
- Overtime Charges Waived
- Price Lock Guarantee for 3 years
Cooling Inspection Points
- Check Freon Levels
- Water Cleaning of Condenser Coil
- Visually Inspect Visible Ductwork
- Measure Supply & Return Air Temperatures
- Clean Indoor/Outdoor Unit Control
- Check Condensation Components & Operation
- Check Thermostat Operation
- Check All Electrical Controls & Safety Options
- Check all Components of Cooling System
- Replace Standard1″ Filter (20×25, 16×25, 20×20, 16×20)*
*One filter per system
Heating Inspection Points
- Conduct CO Test
- Inspect Ignition & Gas Operations of the Furnace
- Inspect All Electrical Controls for Safe Operation
- Inspect Blower & Inducer Draft Motor
- Check Heat Pump Operation (including Heat Strips)
- Measure Supply & Return Air Temperatures
- Check Thermostat Operation
- Replace Batteries on all CO Detectors & Thermostats
- Visually Inspect Visible Ductwork
- Clean Flame Sensor & Pressure Hose
- Replace Standard1″ Filter (20×25, 16×25, 20×20, 16×20)*
*One filter per system
Silver
-
List Item #2
Base Agreement
- 2 Free Visits
- $21 – $18 Monthly Autopay
- $246 – $210 Annual Autopay
- $60 Diagnostic Fee
- 10% Repair/Accessories Discount
- 1 Year Repair Parts Warranty
- 1 Year Repair Labor Warranty
- 2nd Scheduling Priority
- Scheduling Within 24 Hours
- $25 Per System Loyalty Credits Towards Equipment
Cooling Inspection Points
- Check Freon Levels
- Water Cleaning of Condenser Coil
- Visually Inspect Visible Ductwork
- Measure Supply & Return Air Temperatures
- Clean Indoor/Outdoor Unit Control
- Check Condensation Components & Operation
- Check Thermostat Operation
- Check All Electrical Controls & Safety Options
- Check all Components of Cooling System
- Replace Standard1″ Filter (20×25, 16×25, 20×20, 16×20)*
*One filter per system
Heating Inspection Points
- Conduct CO Test
- Inspect Ignition & Gas Operations of the Furnace
- Inspect All Electrical Controls for Safe Operation
- Inspect Blower & Inducer Draft Motor
- Check Heat Pump Operation (including Heat Strips)
- Measure Supply & Return Air Temperatures
- Check Thermostat Operation
- Visually Inspect Visible Ductwork
- Clean Flame Sensor & Pressure Hose
- Replace Standard1″ Filter (20×25, 16×25, 20×20, 16×20)*
*One filter per system
Chrome
-
List Item #2
Base Agreement
- 2 Free Visits
- $14 Monthly Autopay
- $162 Annual Autopay
- $85 Diagnostic Fee
- 5% Repair/Accessories Discount
- 1 Year Repair Parts Warranty
- 6 Month Repair Labor Warranty
- 3rd Scheduling Priority
- Scheduling Time Guarantee
- $10 Per System Loyalty Credits Towards Equipment
Cooling Inspection Points
- Check Freon Levels
- Check All Electrical Controls & Safety Options (Inspect Only)
- Check all Components of Cooling System (Inspect Only)
- Replace Standard1″ Filter (20×25, 16×25, 20×20, 16×20)*
*One filter per system
Heating Inspection Points
- Conduct CO Test
- Inspect Ignition & Gas Operations of the Furnace
- Inspect All Electrical Controls for Safe Operation
- Inspect Blower & Inducer Draft Motor
- Check Heat Pump Operation (including Heat Strips)
- Clean Flame Sensor & Pressure Hose (Inspect Only)
- Replace Standard1″ Filter (20×25, 16×25, 20×20, 16×20)*
*One filter per system
